Course
Water and Wastewater Treatment (MLJ610)
By completion of the course the student should know fundamental principles for treatment methods for potable water and municipal wastewater. This includes quantiotative analysis based on mass and energy balances for design and operation of mechanical, chemical and biological wastewater treatment unit processes. Students will also be able to evaluate sound applications and processing of produced solids, and know the principles for solids management in the circular bioeconomy.
Dette er emnebeskrivelsen for studieåret 2025-2026. Merk at det kan komme endringer.
Fakta
Emnekode
MLJ610
Vekting (stp)
10
Semester undervisningsstart
Spring
Undervisningsspråk
English
Antall semestre
1
Vurderingssemester
Spring
Timeplan
Litteratur
Content
Fundamental and advanced knowledge of mechanisms for biological, chemical and mechanical methods for treatment of industrial process water, potable- and municipal wastewater is covered. Through lectures, coursework and case studies students will gain knowledge and competences to be used for design calculations and operational optimization of primary, secondary, tertiary and advanced tertiary treatment processes based on first principles.
Learning outcome
The students gain knowledge on the basic principles of mechanical, chemical and biological methods for treatment of drinking and different types of wastewater. The student is able to apply the most common parameters associated with wastewater treatment (SS, BOD, N, P, color, total and coliform bacteria) for characterization and treatment evaluation of different wastewater methods. Furthermore, students will be able to design and dimension wastewater treatment unit processes based on mass- and energy balances, including steady state modelling. This includes selected classes of sedimentation, gas absorption, coagulation and flocculation, disinfection, advanced oxidation, biological treatment by suspended and biofilm biomass, aerobic and anaerobic sludge treatment. Case studies from industrial water and wastewater treatment will be analyzed by students (e.g. recirculated aquaculture systems, food industry wastewater processing, oil and gas industrial effluents and solid waste treatment wastewater). Students will also be able to evaluate sound applications and processing of produced solids, and know the principles for solids management in the circular bioeconomy.
Forkunnskapskrav
Ingen
Anbefalte forkunnskaper
Environmental Process Analysis (MLJ530)
Basic chemistry, mathematics and physics as required for admission to MSc Environmental Engineering.
Exam
| Form of assessment | Weight | Duration | Marks | Aid |
|---|---|---|---|---|
| Written exam | 1/1 | 5 Hours | Letter grades | -, All, Calculator |
Campus exam is by pen and paper. Grade scale: A-F.
Fagperson(er)
Course coordinator:
Roald KommedalCoordinator laboratory exercises:
Liv Margareth AkslandHead of Department:
Päivi Annele Teivainen-LædreCourse teacher:
Ilke Pala ØzkøkMethod of work
6 hours lectures per week, exercises and individual readings.Industrial site visits and case studies.
Overlapping
| Emne | Reduksjon (SP) |
|---|---|
| Water Technology and Membranes (MET190_1) , Water and Wastewater Treatment (MLJ610_1) | 10 |
| Water and Wastewater Treatment (MLJ610_1) , Membrane technology (MOT230_1) | 10 |
| Water and Wastewater Treatment (MLJ610_1) , Membrane Technology 1 (MOT500_1) | 5 |
| Water and Wastewater Treatment (MLJ610_1) , Wastewater Treatment (MLJ620_1) | 5 |
Åpent for
Master level studies at the Faculty of Science and Technology.
Emneevaluering
There must be an early dialogue between the course supervisor, the student union representative and the students. The purpose is feedback from the students for changes and adjustments in the course for the current semester.In addition, a digital course evaluation must be carried out at least every three years. Its purpose is to gather the students experiences with the course.
The course description is retrieved from FS (Felles studentsystem). Version 1